 Here’s
“The Original” - Model EF1459 – The Bandsaw that Cuts
Metals, Plastics and Woods Safely and Efficiently
Roll-In Saw built
its reputation on the versatility and durability of this terrific
bandsaw – the EF1459, a.k.a, “The Original.” This was
the first saw in America to use a patented gravity-feed system
that saves time and energy.
The EF1459 is
actually a horizontal bandsaw on a vertical frame. An
all-purpose band saw, it handles all metals, plastics, and woods
in a wide variety of cuts. It is a fast, accurate cut-off
machine that is perfect for notching, slitting, and slotting.
A reliable addition to your shop floor, this bandsaw doubles as a
contour, profile, and rip saw.
Accurate Gravity
Feed
The EF1459 band saw
has a capacity of 14½ inches under the guides and a 9 inch cut.
The blade and vertical column travel on an inclined track that
feeds into the cut in a straight path. Gravity enables the
blade to find its most efficient feed rate. Counterweight
control provides adjustment for optimum cutting pressure and long
blade life. The work piece remains stationary and your hands
need not be in the cutting area during cut-off, an important
safety feature.
 Hydraulic
Feed Control and Blade Shield
The Roll-In Saw
Vertical EF1459 is equipped with a hydraulic safety feed regulator
and adjustable saw blade guard. An adjustable stop can be
pre-set to control the depth that the blade travels into the work.
High Quality Yet
Cost-Effective
The Roll-In Saw
EF1459 is equipped with a large, rigid 18 ½ inch x 30 inch
precision-ground table. Hardened grooved roller guides allow
blades from ¼ to ¾ inch wide without adjustment. Blade
wheels have rubber tires to prevent blade slippage. The
bandsaw comes furnished with an angle plate swivel work block,
large C-clamp, blade/speed selector chart, blade, one horsepower
motor and switch. It is available in either 110V or 220V
single-phase, or 220V or 440V three-phase options.
Price: $3,995.00
|
Technical Data
|
|
Capacity Under Guides
|
14 ½”
|
|
Throat
|
8 ¾”
|
|
Blade Travel
|
9” blade travel into
work
|
|
Blade Length
|
¾” x 8/12T x 10' .035
thick (bi-metal)
|
|
Blade Guards
|
Covers 4 step pulleys and
blade
|
|
Guide Rollers for Blade
Width
|
1/4”, 3/8”, 1/2”,
5/8” and 3/4”
|
|
Blade Speeds
|
70, 140, 270 and 525 fpm
|
|
Table
|
Precision ground, cast
iron table, 18 ½” x 30”
|
| Table Height |
30" from
floor |
|
Wheels
|
Cast iron, 14” x 1
1/8”
|
|
Wheel Tires
|
Replaceable rubber
|
|
Motor
|
1 HP, 110/220V, 60-cycle
single-phase; 1 HP 220/440V, 60 cycle three-phase
|
|
Dimensions
|
30”W x 66”H x 40”L
|
|
Shipping Weight
|
585 lbs. F.O.B Cleveland,
Ohio
|
|
Optional Equipment
|
|
1” Guide Rollers
|
Saw Master®
Accessory Package |
|
Casters 4 Per Set
|
Side Panels (Pair)
|
|
Chip Dust Blower
|
Work Light
|
|
Contour Guide Assembly
|
1” or 5/8” Welder,
Grinder and Shear/Bench Model
|
(Specifications
subject to change without notice)
One Year Limited Warranty
|
