 |
Cutting
Tools
Abrasives MRO
|
 Roll-In
Saw Journeyman JM1220 Vertical Tool and Die Bandsaw
From the digital
speed control with readout to the calibrated tilt-table, the
Journeyman Vertical JM1220 Tool and Die bandsaw from Roll-in Saw
sets the standard for versatility. To increase operator
efficiency, the tilt-table moves 11” front to back by
counterweight pressure controlled with a foot pedal and lock.
The variable speed
control, tilt-table “Adjusto-Blok®” blade guides, safety
shield, chip-clearing funnel, chip blower, angle plate and blades
all add up to high performance when making contour and profile
cuts, rip cuts, and the most complex angle cuts.
Pressure for the
table feed is supplied by two counterweights. One is
adjustable, supplying fifteen pounds to sixty pounds of cutting
pressure. Gravity supplies the power. The hydraulic
regulator system further assures accurate chatter-free cutting
speeds.
The standard
tilting table combined with power feed makes compound angle cuts
practical. This is a perfect precision-cutting machine for
tool and die, R&D, and model shops. |
Price:
$7,475.00
|
Technical
Data
|
|
Capacity Under Guides
|
12 ½” maximum,
table-to-guide
|
|
Throat
|
20”
|
|
Frame
|
Welded steel
|
|
Blade Length
|
3/4" x 12' 10"
.035 thick (bi-metal)
|
| Blade Guard |
Blade |
|
Blade Guides
|
“Adjusto-Blok®” blade
guides for 1/4” to 3/4" blade widths, safety
shield
|
|
Blade Speeds
|
70 to 500 sfpm digital speed
control with readout*
|
|
Table
|
24 ¼” x 24¼” cast iron
precision ground, 45° right, 10° left, 1° calibration
marks
|
|
Feed Systems
|
Gravity feed
|
|
Wheels
|
Aluminum, 20 ¼” x 1 ½”
with polyurethane molded surface
|
|
Motor
|
2HP, 220/440V, 60-cycle,
three-phase
|
| Blade Guard |
Blade |
| Dimensions |
46" W x 80" H x
30" L |
| Shipping Weight |
1,000 lbs. F.O.B. Cleveland,
Ohio |
|
Special
Features
|
|
Table traverses: 11” front
to back by counterweight pressure, controlled by foot
pedal and lock
|
|
|
Compressed air chip blower
|
|
|
|
|
|
|
|
|
|
|
|
Optional
Equipment
|
|
1” or 5/8” welder,
grinder, and shear
|
|
|
*Pulleys for
optional speeds of 140-1038 and 280-2076 sfpm
|
|
(Specifications
subject to change without notice)
One Year Limited Warranty
|
|